WlanInformationElementId enum | Wartiva GraphQL API

WlanInformationElementId is an enum representing the id of the 802.11 information elements (IE). See 802.11-2016.pdf p. 474. The enums are formatted with a truncated description followed by the information element id number. Reference: IEEE 802.11-2020 — Wireless LAN Medium Access Control and Physical Layer Specifications

Values

Enum Value	Description
`SSID_0`	Service Set Identifier (SSID) — IE 0.
`SUPPORTED_RATES_1`	Supported rates — IE 1.
`FH_PARAM_SET_2`	FH (frequency hopping) parameter set — IE 2.
`DSSS_PARAM_SET_3`	DSSS (direct sequence) parameter set — IE 3.
`CF_PARAM_SET_4`	CF (contention free) parameter set — IE 4.
`TIM_5`	Traffic indication map (TIM) — IE 5.
`IBSS_SET_6`	IBSS parameter set — IE 6.
`COUNTRY_7`	Country information — IE 7.
`HOPPING_PATTERN_PARAMS_8`	FH hopping pattern parameters — IE 8.
`HOPPING_PATTERN_TABLE_9`	FH hopping pattern table — IE 9.
`REQ_10`	Request element — IE 10.
`BSS_LOAD_11`	BSS load — IE 11.
`EDCA_PARAM_SET_12`	EDCA parameter set — IE 12.
`TSPEC_13`	Traffic specification (TSPEC) — IE 13.
`TCLAS_14`	Traffic classification (TCLAS) — IE 14.
`SCHEDULE_15`	Schedule — IE 15.
`CHALLENGE_TEXT_16`	Challenge text — IE 16.
`POWER_CONSTRAINT_32`	Power constraint — IE 32.
`POWER_CAPABILITY_33`	Power capability — IE 33.
`TPC_REQ_34`	Transmit power control request — IE 34.
`TPC_REPORT_35`	Transmit power control report — IE 35.
`SUPPORTED_CHANS_36`	Supported channels — IE 36.
`CHAN_SWITCH_ANNOUNCE_37`	Channel switch announcement — IE 37.
`MEASURE_REQ_38`	Measurement request — IE 38.
`MEASURE_REPORT_39`	Measurement report — IE 39.
`QUIET_40`	Quiet period — IE 40.
`IBSS_DFS_41`	IBSS DFS (dynamic frequency selection) — IE 41.
`ERP_INFO_42`	ERP (extended rate PHY) information — IE 42.
`TS_DELAY_43`	TS delay — IE 43.
`TCLAS_PROCESS_44`	TCLAS processing — IE 44.
`HT_CAPABILITY_45`	HT (high throughput / 802.11n) capability — IE 45.
`QOS_CAPABILITY_46`	QoS capability — IE 46.
`ERP_INFO2_RESERVED_47`	ERP information (reserved) — IE 47.
`RSN_INFO_48`	RSN (robust security network / WPA2) information — IE 48.
`EXTENDED_SUPP_RATES_50`	Extended supported rates — IE 50.
`AP_CHAN_REPORT_51`	AP channel report — IE 51.
`NEIGHBOR_REPORT_52`	Neighbor report — IE 52.
`RCPI_53`	Received channel power indicator (RCPI) — IE 53.
`MOBILITY_DOMAIN_MDE_54`	Mobility domain (MDE) for fast BSS transition — IE 54.
`FAST_BSS_TRANS_FTE_55`	Fast BSS transition (FTE) — IE 55.
`TIMEOUT_INTERVAL_56`	Timeout interval — IE 56.
`RIC_DATA_57`	RIC (resource information container) data — IE 57.
`DSE_REGISTERED_LOCATION_58`	DSE registered location — IE 58.
`SUPPORTED_OPERATING_CLASSES_59`	Supported operating classes — IE 59.
`EXTENDED_CHAN_SWITCH_ANNOUNCE_60`	Extended channel switch announcement — IE 60.
`HT_OPERATION_61`	HT operation — IE 61.
`SECONDARY_CHAN_OFFSET_62`	Secondary channel offset — IE 62.
`BSS_AVG_ACCESS_DELAY_63`	BSS average access delay — IE 63.
`ANTENNA_64`	Antenna — IE 64.
`RSNI_65`	Received signal to noise indicator (RSNI) — IE 65.
`MEASURE_PILOT_TRANS_66`	Measurement pilot transmission — IE 66.
`BSS_AVAIL_ADMISSION_CAPACITY_67`	BSS available admission capacity — IE 67.
`BSS_AC_ACCESS_DELAY_68`	BSS AC access delay — IE 68.
`TIME_ADVERT_69`	Time advertisement — IE 69.
`RM_ENABLED_CAPABILITY_70`	Radio measurement (RM) enabled capability — IE 70.
`MULTIPLE_BSSID_71`	Multiple BSSID — IE 71.
`BSS_COEXISTENCE_72`	20/40 BSS coexistence — IE 72.
`BSS_INTOL_CHAN_REPORT_73`	20/40 BSS intolerant channel report — IE 73.
`BSS_SCAN_PARAM_74`	Overlapping BSS scan parameters — IE 74.
`RIC_DESC_75`	RIC descriptor — IE 75.
`MGMT_MIC_76`	Management MIC — IE 76.
`EVENT_REQ_78`	Event request — IE 78.
`EVENT_REPORT_79`	Event report — IE 79.
`DIAG_REQ_80`	Diagnostic request — IE 80.
`DIAG_REPORT_81`	Diagnostic report — IE 81.
`LOCATION_PARAM_82`	Location parameters — IE 82.
`NON_TX_BSSID_CAPABILITY_83`	Non-transmitted BSSID capability — IE 83.
`SSID_LIST_84`	SSID list — IE 84.
`BSSID_INDEX_85`	Multiple BSSID index — IE 85.
`FMS_DESC_86`	FMS descriptor — IE 86.
`FMS_REQ_87`	FMS request — IE 87.
`FMS_RESP_88`	FMS response — IE 88.
`QOS_TRAFFIC_CAPABILITY_89`	QoS traffic capability — IE 89.
`BSS_MAX_IDLE_PERIOD_90`	BSS max idle period — IE 90.
`TFS_REQ_91`	TFS (traffic filtering service) request — IE 91.
`TFS_RESP_92`	TFS response — IE 92.
`WNM_SLEEP_MODE_93`	WNM sleep mode — IE 93.
`TIM_BROADCAST_REQ_94`	TIM broadcast request — IE 94.
`TIM_BROADCAST_RESP_95`	TIM broadcast response — IE 95.
`COLL_INTERFERENCE_REPORT_96`	Collocated interference report — IE 96.
`CHANNEL_USAGE_97`	Channel usage — IE 97.
`TIME_ZONE_98`	Time zone — IE 98.
`DMS_REQ_99`	DMS request — IE 99.
`DMS_RESP_100`	DMS response — IE 100.
`LINK_IDENTIFIER_101`	TDLS link identifier — IE 101.
`WAKEUP_SCHED_102`	TDLS wakeup schedule — IE 102.
`CHAN_SWITCH_TIMING_104`	Channel switch timing — IE 104.
`PTI_CONTROL_105`	PTI control — IE 105.
`TPU_BUFF_STATUS_106`	TPU buffer status — IE 106.
`INTERWORKING_107`	Interworking — IE 107.
`ADVERT_PROTO_108`	Advertisement protocol — IE 108.
`EXP_BANDWIDTH_REQ_109`	Expedited bandwidth request — IE 109.
`QOS_MAP_SET_110`	QoS map set — IE 110.
`ROAM_CONSORT_111`	Roaming consortium — IE 111.
`EMERGENCY_ALERT_ID_112`	Emergency alert identifier — IE 112.
`MESH_CONFIG_113`	Mesh configuration — IE 113.
`MESH_ID_114`	Mesh ID — IE 114.
`MESH_LINK_METRIC_REPORT_115`	Mesh link metric report — IE 115.
`CONGEST_NOTIFY_116`	Congestion notification — IE 116.
`MESH_PEER_MGMT_117`	Mesh peer management — IE 117.
`MESH_CHAN_SWITCH_PARAM_118`	Mesh channel switch parameters — IE 118.
`MESH_AWAKE_WINDOWS_119`	Mesh awake window — IE 119.
`BEACON_TIMING_120`	Beacon timing — IE 120.
`MCCAOP_SETUP_REQ_121`	MCCAOP setup request — IE 121.
`MCCAOP_SETUP_REPLY_122`	MCCAOP setup reply — IE 122.
`MCCAOP_ADVERT_123`	MCCAOP advertisement — IE 123.
`MCCAOP_TEARDOWN_124`	MCCAOP teardown — IE 124.
`GATE_ANNOUNCE_125`	Gate announcement — IE 125.
`ROOT_ANNOUNCE_126`	Root announcement — IE 126.
`EXT_CAPABILITY_127`	Extended capability — IE 127.
`AGERE_PROPRIETARY_128`	Agere proprietary — IE 128.
`PATH_REQUEST_130`	Path request (PREQ) — IE 130.
`PATH_REPL_131`	Path reply (PREP) — IE 131.
`PATH_ERROR_132`	Path error (PERR) — IE 132.
`CISCO_CCX_1CKIP_DEVICE_NAME_133`	Cisco CCX1/CKIP device name — IE 133.
`CISCO_CCX_2_136`	Cisco CCX2 — IE 136.
`PROXY_UPDATE_137`	Proxy update — IE 137.
`PROXY_UPDATE_CONFIRM_138`	Proxy update confirmation — IE 138.
`AUTH_MESH_PEER_EXCH_139`	Authenticated mesh peer exchange — IE 139.
`MIC_140`	MIC (message integrity code) — IE 140.
`DEST_URI_141`	Destination URI — IE 141.
`U_APSD_COEXIST_142`	U-APSD coexistence — IE 142.
`WAKEUP_SCHED_802_11_AD_143`	Wakeup schedule (802.11ad) — IE 143.
`EXT_SCHED_144`	Extended schedule — IE 144.
`STA_AVAIL_145`	STA availability — IE 145.
`DMG_TSPEC_146`	DMG TSPEC — IE 146.
`NEXT_DMG_ATI_147`	Next DMG ATI — IE 147.
`DMS_CAPABILITY_148`	DMS capability — IE 148.
`CISCO_UNKNOWN_95_149`	Cisco unknown 95 — IE 149.
`VENDOR_2_150`	Vendor specific 2 — IE 150.
`DMG_OPERATING_151`	DMG operating information — IE 151.
`DMG_BSS_PARAM_CHANGE_152`	DMG BSS parameter change — IE 152.
`DMG_BEAM_REFINE_153`	DMG beam refinement — IE 153.
`CHAN_MEAS_FEEDBACK_154`	Channel measurement feedback — IE 154.
`AWAKE_WINDOW_157`	Awake window — IE 157.
`MULTI_BAND_158`	Multi-band — IE 158.
`ADDBA_EXT_159`	ADDBA extension — IE 159.
`NEXTPCP_LIST_160`	Next PCP list — IE 160.
`PCP_HANDOVER_161`	PCP handover — IE 161.
`DMG_LINK_MARGIN_162`	DMG link margin — IE 162.
`SWITCHING_STREAM_163`	Switching stream — IE 163.
`SESSION_TRANS_164`	Session transition — IE 164.
`DYNAMIC_TONE_PAIR_REPORT_165`	Dynamic tone pair report — IE 165.
`CLUSTER_REPORT_166`	Cluster report — IE 166.
`RELAY_CAPABILITY_167`	Relay capability — IE 167.
`TRANS_PARAM_168`	Transfer parameters — IE 168.
`BEAM_LINK_MAINT_169`	Beam link maintenance — IE 169.
`MULT_MAC_SUBLAYERS_170`	Multiple MAC sublayers — IE 170.
`U_PID_171`	U-PID — IE 171.
`DMG_LINK_ADAPT_ACK_172`	DMG link adaptation acknowledgement — IE 172.
`SYM_PROPRIETARY_173`	Symbol proprietary — IE 173.
`MCCAOP_ADVERT_OVERVIEW_174`	MCCAOP advertisement overview — IE 174.
`QUIET_PERIOD_REQ_175`	Quiet period request — IE 175.
`QUIET_PERIOD_RESP_177`	Quiet period response — IE 177.
`ECPAC_POLICY_182`	ECPAC policy — IE 182.
`CLUSTER_TIME_OFFSET_183`	Cluster time offset — IE 183.
`ANTENNA_SECTOR_ID_190`	Antenna sector ID pattern — IE 190.
`VHT_CAPABILITY_191`	VHT (802.11ac) capability — IE 191.
`VHT_OPERATION_192`	VHT operation — IE 192.
`EXTENDED_BSS_LOAD_193`	Extended BSS load — IE 193.
`WIDE_BW_CHANNEL_SWITCH_194`	Wide bandwidth channel switch — IE 194.
`VHT_TX_POWER_ENVELOPE_195`	VHT transmit power envelope — IE 195.
`CHANNEL_SWITCH_WRAPPER_196`	Channel switch wrapper — IE 196.
`OPERATING_MODE_NOTIFICATION_199`	Operating mode notification — IE 199.
`UP_SIM_200`	UP SIM — IE 200.
`REDUCED_NEIGHBOR_REPORT_201`	Reduced neighbor report (RNR) — IE 201.
`TVHT_OPERATION_202`	TVHT operation — IE 202.
`DEVICE_LOCATION_204`	Device location — IE 204.
`WHITE_SPACE_MAP_205`	White space map — IE 205.
`FINE_TUNING_MEASURE_PARAM_206`	Fine timing measurement parameters — IE 206.
`VENDOR_221`	Vendor specific — IE 221.

Used by

WlanInformationElement type: WlanInformationElement represents a 802.11 information elements (IE) recognized and parsed if available.

Example

"SSID_0"