---
title: WlanInformationElementId enum | Wartiva GraphQL API
description: WlanInformationElementId is an enum representing the id of the 802.11 information elements (IE). See 802.11-2016.pdf p. 474.
url: https://wartiva.com/api-docs/types/wlan-information-element-id.html
updated: 2026-10-07
---

Networks, devices, and sensors · GraphQL enum

# `WlanInformationElementId` enum

WlanInformationElementId is an enum representing the id of the 802.11 information elements (IE). See 802.11-2016.pdf p. 474. The enums are formatted with a truncated description followed by the information element id number. Reference: [IEEE 802.11-2020 — Wireless LAN Medium Access Control and Physical Layer Specifications](https://standards.ieee.org/ieee/802.11/7028/)

## Values

| Enum Value | Description |
|---|---|
| `SSID_0` | Service Set Identifier (SSID) — IE 0. |
| `SUPPORTED_RATES_1` | Supported rates — IE 1. |
| `FH_PARAM_SET_2` | FH (frequency hopping) parameter set — IE 2. |
| `DSSS_PARAM_SET_3` | DSSS (direct sequence) parameter set — IE 3. |
| `CF_PARAM_SET_4` | CF (contention free) parameter set — IE 4. |
| `TIM_5` | Traffic indication map (TIM) — IE 5. |
| `IBSS_SET_6` | IBSS parameter set — IE 6. |
| `COUNTRY_7` | Country information — IE 7. |
| `HOPPING_PATTERN_PARAMS_8` | FH hopping pattern parameters — IE 8. |
| `HOPPING_PATTERN_TABLE_9` | FH hopping pattern table — IE 9. |
| `REQ_10` | Request element — IE 10. |
| `BSS_LOAD_11` | BSS load — IE 11. |
| `EDCA_PARAM_SET_12` | EDCA parameter set — IE 12. |
| `TSPEC_13` | Traffic specification (TSPEC) — IE 13. |
| `TCLAS_14` | Traffic classification (TCLAS) — IE 14. |
| `SCHEDULE_15` | Schedule — IE 15. |
| `CHALLENGE_TEXT_16` | Challenge text — IE 16. |
| `POWER_CONSTRAINT_32` | Power constraint — IE 32. |
| `POWER_CAPABILITY_33` | Power capability — IE 33. |
| `TPC_REQ_34` | Transmit power control request — IE 34. |
| `TPC_REPORT_35` | Transmit power control report — IE 35. |
| `SUPPORTED_CHANS_36` | Supported channels — IE 36. |
| `CHAN_SWITCH_ANNOUNCE_37` | Channel switch announcement — IE 37. |
| `MEASURE_REQ_38` | Measurement request — IE 38. |
| `MEASURE_REPORT_39` | Measurement report — IE 39. |
| `QUIET_40` | Quiet period — IE 40. |
| `IBSS_DFS_41` | IBSS DFS (dynamic frequency selection) — IE 41. |
| `ERP_INFO_42` | ERP (extended rate PHY) information — IE 42. |
| `TS_DELAY_43` | TS delay — IE 43. |
| `TCLAS_PROCESS_44` | TCLAS processing — IE 44. |
| `HT_CAPABILITY_45` | HT (high throughput / 802.11n) capability — IE 45. |
| `QOS_CAPABILITY_46` | QoS capability — IE 46. |
| `ERP_INFO2_RESERVED_47` | ERP information (reserved) — IE 47. |
| `RSN_INFO_48` | RSN (robust security network / WPA2) information — IE 48. |
| `EXTENDED_SUPP_RATES_50` | Extended supported rates — IE 50. |
| `AP_CHAN_REPORT_51` | AP channel report — IE 51. |
| `NEIGHBOR_REPORT_52` | Neighbor report — IE 52. |
| `RCPI_53` | Received channel power indicator (RCPI) — IE 53. |
| `MOBILITY_DOMAIN_MDE_54` | Mobility domain (MDE) for fast BSS transition — IE 54. |
| `FAST_BSS_TRANS_FTE_55` | Fast BSS transition (FTE) — IE 55. |
| `TIMEOUT_INTERVAL_56` | Timeout interval — IE 56. |
| `RIC_DATA_57` | RIC (resource information container) data — IE 57. |
| `DSE_REGISTERED_LOCATION_58` | DSE registered location — IE 58. |
| `SUPPORTED_OPERATING_CLASSES_59` | Supported operating classes — IE 59. |
| `EXTENDED_CHAN_SWITCH_ANNOUNCE_60` | Extended channel switch announcement — IE 60. |
| `HT_OPERATION_61` | HT operation — IE 61. |
| `SECONDARY_CHAN_OFFSET_62` | Secondary channel offset — IE 62. |
| `BSS_AVG_ACCESS_DELAY_63` | BSS average access delay — IE 63. |
| `ANTENNA_64` | Antenna — IE 64. |
| `RSNI_65` | Received signal to noise indicator (RSNI) — IE 65. |
| `MEASURE_PILOT_TRANS_66` | Measurement pilot transmission — IE 66. |
| `BSS_AVAIL_ADMISSION_CAPACITY_67` | BSS available admission capacity — IE 67. |
| `BSS_AC_ACCESS_DELAY_68` | BSS AC access delay — IE 68. |
| `TIME_ADVERT_69` | Time advertisement — IE 69. |
| `RM_ENABLED_CAPABILITY_70` | Radio measurement (RM) enabled capability — IE 70. |
| `MULTIPLE_BSSID_71` | Multiple BSSID — IE 71. |
| `BSS_COEXISTENCE_72` | 20/40 BSS coexistence — IE 72. |
| `BSS_INTOL_CHAN_REPORT_73` | 20/40 BSS intolerant channel report — IE 73. |
| `BSS_SCAN_PARAM_74` | Overlapping BSS scan parameters — IE 74. |
| `RIC_DESC_75` | RIC descriptor — IE 75. |
| `MGMT_MIC_76` | Management MIC — IE 76. |
| `EVENT_REQ_78` | Event request — IE 78. |
| `EVENT_REPORT_79` | Event report — IE 79. |
| `DIAG_REQ_80` | Diagnostic request — IE 80. |
| `DIAG_REPORT_81` | Diagnostic report — IE 81. |
| `LOCATION_PARAM_82` | Location parameters — IE 82. |
| `NON_TX_BSSID_CAPABILITY_83` | Non-transmitted BSSID capability — IE 83. |
| `SSID_LIST_84` | SSID list — IE 84. |
| `BSSID_INDEX_85` | Multiple BSSID index — IE 85. |
| `FMS_DESC_86` | FMS descriptor — IE 86. |
| `FMS_REQ_87` | FMS request — IE 87. |
| `FMS_RESP_88` | FMS response — IE 88. |
| `QOS_TRAFFIC_CAPABILITY_89` | QoS traffic capability — IE 89. |
| `BSS_MAX_IDLE_PERIOD_90` | BSS max idle period — IE 90. |
| `TFS_REQ_91` | TFS (traffic filtering service) request — IE 91. |
| `TFS_RESP_92` | TFS response — IE 92. |
| `WNM_SLEEP_MODE_93` | WNM sleep mode — IE 93. |
| `TIM_BROADCAST_REQ_94` | TIM broadcast request — IE 94. |
| `TIM_BROADCAST_RESP_95` | TIM broadcast response — IE 95. |
| `COLL_INTERFERENCE_REPORT_96` | Collocated interference report — IE 96. |
| `CHANNEL_USAGE_97` | Channel usage — IE 97. |
| `TIME_ZONE_98` | Time zone — IE 98. |
| `DMS_REQ_99` | DMS request — IE 99. |
| `DMS_RESP_100` | DMS response — IE 100. |
| `LINK_IDENTIFIER_101` | TDLS link identifier — IE 101. |
| `WAKEUP_SCHED_102` | TDLS wakeup schedule — IE 102. |
| `CHAN_SWITCH_TIMING_104` | Channel switch timing — IE 104. |
| `PTI_CONTROL_105` | PTI control — IE 105. |
| `TPU_BUFF_STATUS_106` | TPU buffer status — IE 106. |
| `INTERWORKING_107` | Interworking — IE 107. |
| `ADVERT_PROTO_108` | Advertisement protocol — IE 108. |
| `EXP_BANDWIDTH_REQ_109` | Expedited bandwidth request — IE 109. |
| `QOS_MAP_SET_110` | QoS map set — IE 110. |
| `ROAM_CONSORT_111` | Roaming consortium — IE 111. |
| `EMERGENCY_ALERT_ID_112` | Emergency alert identifier — IE 112. |
| `MESH_CONFIG_113` | Mesh configuration — IE 113. |
| `MESH_ID_114` | Mesh ID — IE 114. |
| `MESH_LINK_METRIC_REPORT_115` | Mesh link metric report — IE 115. |
| `CONGEST_NOTIFY_116` | Congestion notification — IE 116. |
| `MESH_PEER_MGMT_117` | Mesh peer management — IE 117. |
| `MESH_CHAN_SWITCH_PARAM_118` | Mesh channel switch parameters — IE 118. |
| `MESH_AWAKE_WINDOWS_119` | Mesh awake window — IE 119. |
| `BEACON_TIMING_120` | Beacon timing — IE 120. |
| `MCCAOP_SETUP_REQ_121` | MCCAOP setup request — IE 121. |
| `MCCAOP_SETUP_REPLY_122` | MCCAOP setup reply — IE 122. |
| `MCCAOP_ADVERT_123` | MCCAOP advertisement — IE 123. |
| `MCCAOP_TEARDOWN_124` | MCCAOP teardown — IE 124. |
| `GATE_ANNOUNCE_125` | Gate announcement — IE 125. |
| `ROOT_ANNOUNCE_126` | Root announcement — IE 126. |
| `EXT_CAPABILITY_127` | Extended capability — IE 127. |
| `AGERE_PROPRIETARY_128` | Agere proprietary — IE 128. |
| `PATH_REQUEST_130` | Path request (PREQ) — IE 130. |
| `PATH_REPL_131` | Path reply (PREP) — IE 131. |
| `PATH_ERROR_132` | Path error (PERR) — IE 132. |
| `CISCO_CCX_1CKIP_DEVICE_NAME_133` | Cisco CCX1/CKIP device name — IE 133. |
| `CISCO_CCX_2_136` | Cisco CCX2 — IE 136. |
| `PROXY_UPDATE_137` | Proxy update — IE 137. |
| `PROXY_UPDATE_CONFIRM_138` | Proxy update confirmation — IE 138. |
| `AUTH_MESH_PEER_EXCH_139` | Authenticated mesh peer exchange — IE 139. |
| `MIC_140` | MIC (message integrity code) — IE 140. |
| `DEST_URI_141` | Destination URI — IE 141. |
| `U_APSD_COEXIST_142` | U-APSD coexistence — IE 142. |
| `WAKEUP_SCHED_802_11_AD_143` | Wakeup schedule (802.11ad) — IE 143. |
| `EXT_SCHED_144` | Extended schedule — IE 144. |
| `STA_AVAIL_145` | STA availability — IE 145. |
| `DMG_TSPEC_146` | DMG TSPEC — IE 146. |
| `NEXT_DMG_ATI_147` | Next DMG ATI — IE 147. |
| `DMS_CAPABILITY_148` | DMS capability — IE 148. |
| `CISCO_UNKNOWN_95_149` | Cisco unknown 95 — IE 149. |
| `VENDOR_2_150` | Vendor specific 2 — IE 150. |
| `DMG_OPERATING_151` | DMG operating information — IE 151. |
| `DMG_BSS_PARAM_CHANGE_152` | DMG BSS parameter change — IE 152. |
| `DMG_BEAM_REFINE_153` | DMG beam refinement — IE 153. |
| `CHAN_MEAS_FEEDBACK_154` | Channel measurement feedback — IE 154. |
| `AWAKE_WINDOW_157` | Awake window — IE 157. |
| `MULTI_BAND_158` | Multi-band — IE 158. |
| `ADDBA_EXT_159` | ADDBA extension — IE 159. |
| `NEXTPCP_LIST_160` | Next PCP list — IE 160. |
| `PCP_HANDOVER_161` | PCP handover — IE 161. |
| `DMG_LINK_MARGIN_162` | DMG link margin — IE 162. |
| `SWITCHING_STREAM_163` | Switching stream — IE 163. |
| `SESSION_TRANS_164` | Session transition — IE 164. |
| `DYNAMIC_TONE_PAIR_REPORT_165` | Dynamic tone pair report — IE 165. |
| `CLUSTER_REPORT_166` | Cluster report — IE 166. |
| `RELAY_CAPABILITY_167` | Relay capability — IE 167. |
| `TRANS_PARAM_168` | Transfer parameters — IE 168. |
| `BEAM_LINK_MAINT_169` | Beam link maintenance — IE 169. |
| `MULT_MAC_SUBLAYERS_170` | Multiple MAC sublayers — IE 170. |
| `U_PID_171` | U-PID — IE 171. |
| `DMG_LINK_ADAPT_ACK_172` | DMG link adaptation acknowledgement — IE 172. |
| `SYM_PROPRIETARY_173` | Symbol proprietary — IE 173. |
| `MCCAOP_ADVERT_OVERVIEW_174` | MCCAOP advertisement overview — IE 174. |
| `QUIET_PERIOD_REQ_175` | Quiet period request — IE 175. |
| `QUIET_PERIOD_RESP_177` | Quiet period response — IE 177. |
| `ECPAC_POLICY_182` | ECPAC policy — IE 182. |
| `CLUSTER_TIME_OFFSET_183` | Cluster time offset — IE 183. |
| `ANTENNA_SECTOR_ID_190` | Antenna sector ID pattern — IE 190. |
| `VHT_CAPABILITY_191` | VHT (802.11ac) capability — IE 191. |
| `VHT_OPERATION_192` | VHT operation — IE 192. |
| `EXTENDED_BSS_LOAD_193` | Extended BSS load — IE 193. |
| `WIDE_BW_CHANNEL_SWITCH_194` | Wide bandwidth channel switch — IE 194. |
| `VHT_TX_POWER_ENVELOPE_195` | VHT transmit power envelope — IE 195. |
| `CHANNEL_SWITCH_WRAPPER_196` | Channel switch wrapper — IE 196. |
| `OPERATING_MODE_NOTIFICATION_199` | Operating mode notification — IE 199. |
| `UP_SIM_200` | UP SIM — IE 200. |
| `REDUCED_NEIGHBOR_REPORT_201` | Reduced neighbor report (RNR) — IE 201. |
| `TVHT_OPERATION_202` | TVHT operation — IE 202. |
| `DEVICE_LOCATION_204` | Device location — IE 204. |
| `WHITE_SPACE_MAP_205` | White space map — IE 205. |
| `FINE_TUNING_MEASURE_PARAM_206` | Fine timing measurement parameters — IE 206. |
| `VENDOR_221` | Vendor specific — IE 221. |

## Used by

- [`WlanInformationElement`](https://wartiva.com/api-docs/types/wlan-information-element.html) type: WlanInformationElement represents a 802.11 information elements (IE) recognized and parsed if available.

## Example

### Example

```json
"SSID_0"

```

---

Wartiva is in early access. Request access: https://wartiva.com/early-access.html  
All pages: https://wartiva.com/llms.txt